A package built around the intended task.
This product is offered as a separate configuration. The final hardware, software and service list is assembled around the application and recorded in the confirmed quotation.
X series
AGIBOT X2 EDU Complete Machine Component Package
1 / 2
The software and equipment required for these applications are specified in the quotation.
An X2 component package for education, research and robot assembly projects.
Contact us for pricing.
Availability and configuration are agreed individually.
A closer look at the X2 EDU component package.
Operating requirements matter alongside the hardware.
The developer environment, teaching material and documentation determine how the package fits an education programme.
A pilot reveals the practical possibilities.
Trials use predefined tasks and acceptance criteria. These distinguish manufacturer-provided functions, optional modules and custom development.
Equipment and construction.
Movement and mechanics
- Applications
- Education, research and system development
Sensing and control
- Sensors and communication
- To be confirmed for the selected package
- SDK, licences and educational documentation
- To be confirmed for the selected package
Power and operation
- Power supply, charger and safety accessories
- To be confirmed for the selected package
COMPLETE DATA SHEET
Technical specifications.
Known package information and items requiring agreement. Complete data for the associated platform appears in a separate reference section.
Source: AGIBOT ↗
Design and equipment
- Version
- X2 EDU Complete Machine Component Package
- Applications
- Education, research and system development
- Package contents
- Itemised bill of materials in the individual quotation
- Bill of materials and quantities
- To be confirmed for the selected package
- Assembly state and delivery format
- To be confirmed for the selected package
View full technical specificationsShow less
A complete public variant-specific data sheet is not available for this exact SKU. The items above are points for discussion, not verified promises of standard equipment. The linked manufacturer page describes the product family.
Control, software and connectors
- Control electronics and computing modules
- To be confirmed for the selected package
- SDK, licences and educational documentation
- To be confirmed for the selected package
Sensing and interaction
- Sensors and communication
- To be confirmed for the selected package
Power and operating time
- Power supply, charger and safety accessories
- To be confirmed for the selected package
AGIBOT X2 — complete base-platform specifications
The table below describes the associated robot platform, not the confirmed equipment of the X2 EDU component package. Package contents, total weight, power consumption and capabilities require separate agreement.
Base-platform product page ↗Dimensions and mechanics
- Dimensions (H × W × D)
- 1310 × 460 × 210 mm
- Height
- approx. 1.31 m
- Weight
- approx. 35 kg
- Active degrees of freedom
- 25
- Neck degrees of freedom
- 0
- Degrees of freedom per arm
- 5
- Waist degrees of freedom
- 3
- Degrees of freedom per leg
- 6
- Arm reach
- 558 mm, excluding end effector
- Temperature range
- −10…40 °C
Sensing and interaction
- 3D LiDAR
- None
- RGB-D camera
- None
- RGB cameras
- Interactive RGB camera
- Head touch sensor
- Equipped
- Audio input and output
- Microphone array, wireless microphone and speaker
- Display and lighting
- Interactive display and light indicators
Motion and payload
- Peak joint torque
- 120 Nm
- Maximum walking speed stated by manufacturer
- 1.8 m/s
- Typical walking speed
- ≤ 0.8 m/s
- Laboratory speed limit
- ≤ 2 m/s; not a general operating speed
- Payload in specific postures
- Up to 3 kg, excluding end effector
- Payload throughout the full range of motion
- ≤ 1 kg, excluding end effector
Battery and charging
- Battery capacity
- approx. 500 Wh
- Operating time
- approx. 2 hours, while walking at 0.5 m/s
- Power supply
- Direct charging and replaceable battery
- Automatic charging dock
- Not supported
- Charging time
- ≤ 1.5 hours
- Charger input voltage
- 100–220 V; confirm the EU mains configuration
- Charger output
- 54.6 V / 10 A
Computing and connectors
- Main computing unit
- 2 × RK3588
- High-performance computing module
- None
- Communication
- Wi-Fi, Bluetooth
- USB Type-A
- 1 unit
- USB Type-C
- 1 unit
- LAN connectors
- Not listed
- 12 V power output
- 1 × 12 V / 3 A
- 48 V power output
- 1 × 48 V / 5 A
Computing, communication and software
- Video output
- Not specified
Software and accessories
- Handheld controller
- Included in the manufacturer package
- OTA updates
- Supported
- Mobile application
- Supported
- Customer-side development / SDK
- Not supported
- Autonomous navigation and obstacle avoidance
- Not supported
- OmniHand / OmniPicker compatibility
- Not supported
- Robot unit
- 1 unit
- Charger
- 1 unit
- Handheld controller quantity
- 1 unit
- Microphone
- 1 unit
- Quick start guide
- 1 unit
- Robot conformity document
- 1 unit
- Separate battery package
- 1 battery and 1 conformity document
Performance depends on load, environment and configuration. Equipment and software packages are confirmed in the quotation.
AGIBOT X2 Ultra — complete base-platform specifications
The table below describes the associated robot platform, not the confirmed equipment of the X2 EDU component package. Package contents, total weight, power consumption and capabilities require separate agreement.
Base-platform product page ↗Dimensions and mechanics
- Dimensions (H × W × D)
- 1310 × 460 × 210 mm
- Height
- approx. 1.31 m
- Weight
- approx. 39 kg
- Active degrees of freedom
- 31
- Neck degrees of freedom
- 2
- Degrees of freedom per arm
- 7
- Waist degrees of freedom
- 3
- Degrees of freedom per leg
- 6
- Arm reach
- 558 mm, excluding end effector
- Temperature range
- −10…40 °C
Sensing and interaction
- 3D LiDAR
- Equipped
- RGB-D camera
- Equipped
- RGB cameras
- Interactive RGB, front dual RGB and rear RGB
- Head touch sensor
- Equipped
- Audio input and output
- Microphone array, wireless microphone and speaker
- Display and lighting
- Interactive display and light indicators
Motion and payload
- Peak joint torque
- 120 Nm
- Maximum walking speed stated by manufacturer
- Up to 2 m/s under laboratory conditions
- Typical walking speed
- ≤ 0.8 m/s
- Laboratory speed limit
- ≤ 2 m/s; not a general operating speed
- Payload in specific postures
- Up to 3 kg, excluding end effector
- Payload throughout the full range of motion
- ≤ 1 kg, excluding end effector
Battery and charging
- Battery capacity
- approx. 500 Wh
- Operating time
- approx. 2 hours, while walking at 0.5 m/s
- Power supply
- Direct charging and replaceable battery
- Automatic charging dock
- Not standard equipment; availability and compatibility require confirmation
- Charging time
- ≤ 1.5 hours
- Charger input voltage
- 100–220 V; confirm the EU mains configuration
- Charger output
- 54.6 V / 10 A
Computing and connectors
- Main computing unit
- 2 × RK3588
- High-performance computing module
- Orin NX, 157 TOPS
- Communication
- Wi-Fi, Bluetooth, 4G/5G module; EU radio configuration to be confirmed
- USB Type-A
- 2 units
- USB Type-C
- 2 units
- LAN connectors
- 2 × RJ45
- 12 V power output
- 1 × 12 V / 3 A
- 48 V power output
- 1 × 48 V / 5 A
Computing, communication and software
- Video output
- Mini DP × 1
Software and accessories
- Handheld controller
- Included in the manufacturer package
- OTA updates
- Supported
- Mobile application
- Supported
- Customer-side development / SDK
- Supported
- Autonomous navigation and obstacle avoidance
- Requires a separate autonomous navigation package, site configuration and a suitable operating environment
- OmniHand / OmniPicker compatibility
- Optional, ordered separately; not standard equipment
- Robot unit
- 1 unit
- Charger
- 1 unit
- Handheld controller quantity
- 1 unit
- Microphone
- 1 unit
- Quick start guide
- 1 unit
- Robot conformity document
- 1 unit
- Separate battery package
- 1 battery and 1 conformity document
Performance depends on load, environment and configuration. Equipment and software packages are confirmed in the quotation.
Actual performance depends on the environment, load, software and configuration. Maximum values may reflect different test conditions and may not be achievable simultaneously.
Package contents and options.
Package contents subject to agreement
- Robot or component according to the selected product variant
- Sensors and accessories according to an itemised package list
- Software and licences specified in the quotation
- Documentation and handover materials within the agreed scope
To be agreed in the quotation
- Exact hardware version and required accessories.
- SDK, application modules and licence terms.
- Deployment, integration and on-site testing.
- Training, support and maintenance scope.
The confirmed quotation itemises the equipment and licences included in the delivery. Illustrations may show optional accessories.
Applications.
Examples of possible uses. Required development and services are agreed for each project.
Requirements review
Define the task, environment and expected results.
Pilot
Run a trial in a limited area against agreed criteria.
Deployment
Install the validated configuration and hand over the operating procedures.
Frequently asked questions.
Why do some package details need confirmation?
A complete public specification is not available for this package. Specifications of related robots do not automatically describe the supplied package.
What should the quotation specify?
It should identify the hardware, software, configuration-specific specifications and scope of any separate services.
Do platform specifications also describe the complete package?
Additional sensors and computers change weight, power use and system performance. Check the assembled configuration.
Product data and manufacturer images: AGIBOT. For custom solution packages, the reference describes the base platform.
NT SYS · AGIBOT ROBOTICS
Let’s discuss your application.
We help select the right model, equipment and services.